8
Navigating the System Setup Menu
When in the System Setup menu, the up and down arrow keys will
move the highlighted bar up and down the system setup options. See
the System Setup menu section of this manual for more information
about these options.
FIRST POWER ON
The instrument will step through an initial configuration when powered
on for the first time. This will set the language, sensor, and membrane
options. Use the up or down arrow keys to highlight the appropriate
language, sensor, and membrane, then press enter to confirm (Figures
6, 7, and 8). The Sensor Type must be configured for the sensor
installed. Failure to do this may result in damage not covered under
warranty. If an incorrect option is selected, it may be changed in the
System Setup menu.
Figure 6, Language selection
Select Sensor Type:
Polaro (black)
Galvanic (grey)
Use
to select
sensor type
Press
to confirm
Select Membrane
Type:
1.25 (Yellow)
2.0 (Blue)
Use
to select
membrane
Press
to confirm
Figure 7, Sensor selection Figure 8, Membrane selection
