Ypsomed OmniPod my life, Руководство пользователя, Страница: 99 / 186

Checking Your Blood Glucose
86
7
2. To help you see the test strip port in reduced lighting, press
the middle soft key labeled Light . To turn the light off, press
Light again.
3. Insert only the top end of the strip into the test strip port
(Figure 7-16 and Figure 7-17).
Set the blood glucose test strip code
After you insert the strip, the PDM displays a code number
(Figure 7-18). This number must match the code on the side of
the vial.
From some PDM screens, you cannot access the Free-
Style® blood glucose meter. For example, you cannot
use the meter while you are activating a Pod or when
an alert, alarm or communication error screen is dis-
played. In these cases, if you insert a test strip, the
PDM beeps to alert you.
Figure 7-16
Top
Bottom
Figure 7-17
If you do not start the test within 2 minutes, the PDM
powers off. To restart the PDM, take out the unused strip
and reinsert it, or simply press and hold the
Power but-
ton to turn on the PDM. Refer to page 55 to check Pod
status and to
Confirm ID .
Figure 7-18