Ypsomed OmniPod my life, Руководство пользователя

Страница: 32 / 186

Understanding and Adjusting Basal Rates
19
3
e. Repeat steps a–d for each new segment and rate you
want, then press Done .
7. Review the graph of the new basal program (Figure 3-5).
8. To see the program as a list, press List (Figure 3-6). To see the
graph again, press Graph .
The total daily basal that will be delivered is shown at the
bottom of each “Basal programs” graph and list.
9. To add the program to the PDM’s memory, press Save .
Repeat steps 1 through 9 (above) for each basal program (up to 7
programs) you want to create.
Enable an existing basal program
1. On the Home screen, use the Up/Down Controller buttons
to choose Settings ; then press Select .
2. Choose Basal programs , then press Select .
Basal rates outside the changed segment do not
change.
Press and hold the Power button to turn the screen
back on. In some cases, if it has been less than 5
minutes since the screen timed out, pressing the
Power button returns you to the same screen you
were using. If it has been longer than 5 minutes, the
PDM brings you to the
Status screen.
Figure 3-5 Figure 3-6