3
Binding Instructions
1. print your pages or photos and place
them in the spine of the album cover.
4. Remove album cover from heating
element and place it spine down
in the cooling rack. Allow album
to cool 5 minutes or pages may
become loose.
Note:
If a page is loose after binding is complete, simply repeat the binding process and ensure
all pages are all the way down into the spine. Binder will automatically turn off after 10 minutes of dormancy.
TIP:
Score your photos or pages about 1/4" on the binding side, front and back, before assembling
your book. Scoring allows for easier turning of pages.
2. plug in the yourStory
®
photo. press
the power button . The power
button will blink as it is warming
up (approximately 2 minutes). When
it is finished it will beep and the
timer button will light up.
3. place the album cover, spine down,
into the yourStory
®
photo. push the
cover down until the spine touches
the heating element. press the timer
button . It will blink. Allow the
album to rest freely while binding (do
not hold). When you hear a beep and
the timer button no longer blinks,
the binding process is complete
(takes just over 1 minute).
