26
YOU-RIDE KILIMANJARO
8. LCD Display
·
Walk Speed setting
Walk Speed refers to push-assist mode speed. The settable range is 3-6 km/h. 3km/h
is the slowest while 6km/h is the fastest. The default push-assist speed is decided
by the controller. Press
UP/DOWN
to increase or decrease the speed limit to your
desired value. Hold the
ON/OFF
button 1s to confirm and exit the settings status.
·
Password (Password refers to the display power-on password.)
Press
UP/DOWN
button to choose ‘Password’ and
ON/OFF
to confirm. Meanwhile
press
UP/DOWN
button to choose ‘Start Password’ and press
ON/OFF
to confirm.
Press
UP/DOWN
to shift from ‘OFF’ to ‘ON’.
·
Power-on password enable
In “Start Password” interface, choose ‘ON’ and press
ON/OFF
to confirm. Meanwhile,
display interface asks for a password. Press
UP/DOWN
button to increase or decrease
numbers and press
ON/OFF
to confirm the first digit and move to the next digit.
After 4 digits of a password are input, press
ON/OFF
to confirm and the interface
will prompt for re-entering the password. If two inputs are consistent, the system
prompts that the password is set successfully. If two inputs are inconsistent, the
first input needs to be repeated correctly and confirm the new password again. The
interface will be redirected to original settings page in 2 seconds after the password is
set successfully. Hold
ON/OFF
to return to the home page or by route ‘BACK’ →’home
page’ .
