manualshive.com logo in svg

You-Q XP, Руководство по обслуживанию, Страница: 41 / 54

Поделиться
Скачать
You-Q XP Скачать руководство пользователя страница 41

Problem

Cause

Solution

Service indicator flashes
once

User error.
This is probably a 'STALL'
timeout.

Put the joystick in neutral
and try again.

Service indicator flashes
twice

Battery fault.

Check batteries and
cabling. Charge the
batteries or replace them.

The ON-OFF light flashes 3
times.

The left-hand motor (m1)
connection is not good.

Check the connection and
the cabling.

The left-hand motor (m1) is
defect.

Replace this motor.

The ON-OFF light flashes 4
times.

The right-hand motor (m2)
connection is not good.

Check the connection and
the cabling.

The m2 motor is defect.

Replace this motor

The ON-OFF light flashes 5
times

The left-hand parking brake
(m1) connection is not
good or disconnected.

Check the connection and
the cabling.

The left-hand parking brake
(m1) is defect.

Replace this motor.

The ON-OFF light flashes 6
times

The right-hand parking
brake (m2) connection is
not good or disconnected.

Check the connection and
the cabling.

The right-hand parking
brake (m2) is defect.

Replace this motor.

The ON-OFF light flashes 7
times

Controller fault

Check all connections and
correct them if needed.
If the fault signal is still
present after this, replace
the controller.

The ON-OFF light flashes 8
times

Power module fault

Check all connections and
correct them if needed.
If the fault signal is still
present after this, replace
the power module.

The ON-OFF light flashes 9
times

Communication fault in the
Shark system

Check all connections and
correct them if needed.
If the fault signal is still
present after this, replace
the controller.

Troubleshooting

Service manual - XP

41

Содержание XP























































Отзывы:

Нет отзывов