You-Q XP, Руководство по обслуживанию, Страница: 17 / 54

5.2. Carrier
5.2.1. Replace the carbon brushes
Preparation
See section 5.1.
Procedure
1. Remove the cap (A).
2. Remove the old carbon brush (B).
3. Gently blow some air through the hole (to
remove any dust).
4. Put the new carbon brush in the motor.
5. Put the cap on the motor.
6. Repeat steps 1 through 5 for all the carbon
brushes on the motor.
A
B
Completion
See section 5.9.
5.2.2. Replace a drive motor
Preparation
See section 5.1.
Procedure
1. Remove cap A.
2. Unfold the washer (D).
3. Remove screw B and washer C.
4. Remove the drive wheel (E) from the motor
axle.
•
Make sure that you do not loose the
key (F).
D
C B A
E
F
B
5. Replace the drive motor, depending on the drive type:
•
FWD: see step 6.
• RWD: see step 7.
Maintenance tasks & adjustments
Service manual - XP 17