11
■
EPDT-263b
■
(3) Rotate the screen by 45
°
. *3
(6) Lower each of the handles between the
stopper and install the thumbscrew. *4
*3 Rotate the screen until the top (left) corner
of the triangle embossed on the body is
aligned with the top (right) corner of the
triangle printed on the screen handle.
If these triangles are not aligned with each
other, the screen may come off during use.
Caution
Align corners of
the triangles.
NG
The handle is not
engaged with the
stopper by the
thumbscrew.
The handle is not
between the
stopper.
(5) Rotate the stopper ring until each
handle reaches the stopper.
(4) Install the cover to the body.
Push in the cover strongly until the stopper ring
tab comes in contact with the body.
At this time, wipe the old grease and apply new
grease to the O-ring or its contact surface.
Stopper
Warning
*4 Before using the product, make sure to
lower each of the handles between the
stopper and install the thumbscrew.
It is very dangerous to use the product in
the following conditions. Failure to follow
this notice may cause the cover to come off.
NG
