10
■
EPDT-263b
■
(8) Detach the screen.
Clean the screen using compressed air or a detergent.
7.4 Reassembly
Caution
1. Clean the O-ring and its contact surface to remove foreign substances.
* Residual foreign substances may cause outside leakage.
2. Apply grease to the O-ring or its contact surface after wiping the old grease (recommended grease:
G-501 by Shin-Etsu Chemical Co., Ltd.).
* Failure to follow this notice may cause the O-ring to be damaged.
3. If the screen is deformed or damaged, replace it with a new one.
* Failure to follow this notice may keep the product from functioning properly.
4. If the O-ring is damaged or deteriorated, replace it with a new one.
* Failure to follow this notice may cause outside leakage.
5. Watch your fingers not to be caught between the body and the cover when installing the cover.
(1) Put the screen into the body.
(2) Insert the tabs of the screen between the grooves
on the body. At this time, wipe the old grease and
apply new grease to the O-ring or its contact
surface.
O-ring
O-ring
contact
surface
