![background image](http://html.mh-extra.com/html/zurn/zs880/zs880_installation-instructions-manual_942719001.webp)
ZS880
LINEAR SHOWER DRAIN INSTALLATION INSTRUCTIONS
Zurn Industries, LLC
|
Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
In Canada
|
Zurn Industries Limited
3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292
www.zurn.com
®
Rev.
-
Date:
4/23/2018
C.N. No.
139950
Form No. FT1009
Page 1 of 6
Dimensional data (inches and [mm]) are subject to manufacturing tolerances and change without notice.
Drain Components
PAT. NO.
8,347,424
Introduction
The Zurn ZS880 Stainless Steel Linear Shower Drain incorporates a simple approach to bathroom shower design, when
compared to traditional point-drain applications. The linear shower drain expands the floor surface area for water collection
and eliminates the need for multiple slope construction of the floor. When handling and installing the ZS880 linear drain,
please pay close attention to the following guidelines and warnings:
• Please handle all stainless steel material with caution. The manufacturing process used in making this
product can inadvertently produce sharp edges, which may result in injury if handled or used improperly.
• Please adhere to all torque specification requirements outlined within these instructions when tightening
hardware during installation.
• Do not apply corrosive chemicals to this product which may alter the appearance and surface finish.
• All grating provided with this product is rated for light-duty applications, per ASME Standard A112.6.3
specifications.
WARNING
: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
ADVERTENCIA:
Cáncer y daño reproductivo -
www.P65Warnings.ca.gov
AVERTISSEMENT:
Cancer et effets néfastes sur la reproduction -
www.P65Warnings.ca.gov
ADJUSTABLE LEG SCREW
(#6-32 X
1
2
PHMS)
#6 SS WASHER
SHOWER CHANNEL ASSEMBLY
ADJUSTABLE LEG
LEVELING SCREW
(#10-24 X
7
8
FHHSS)
TILING EDGE FRAME
FRAME SECURING SCREW
(#10-24 X
7
8
FHHSS)
GRATE
GRATE SECURING SCREW
(#6-32 X
3
4
SHCS)