YOSensi YO Power, Руководство пользователя

Страница: 5 / 28

YO Power User guide v4.0 page 5/28
Device sticker placed on the right side of the device enclosure contains information about model,
version, LoRaWAN region and 3 parameters important in case of device identification and
configuration:
- DEV EUI: 64-bit unique device identifier in a LoRaWAN network,
- DEV ADDR: address required to connect via ABP activation type to LoRaWAN,
- BLE MAC: bluetooth physical address.
Figure 2 Device sticker.
Physical interfaces
LEDs
YO Power communicates its current behavior to the user by RGBW LED placed on the top of the
device shown on figure one.
DIODE STATUES INTERPRETATION
BEHAVIOUR COLOUR DEVICE STATUS
Single flash Green General: device is working correctly (power and memory).
Single flash Red General: device is working incorrectly (power and memory).
LoRaWAN communication: failed to receive an
acknowledgement from LoRaWAN Server within specified
timeout.
Single flash White LoRaWAN communication: LoRaWAN frame sent \
confirmation from LoRaWAN Server after receiving the frame.
Slow flashing Blue BLE communication: connection to the device via BLE
(configuration).
Rapid flashing Blue LoRaWAN communication: connecting to LoRaWAN network.
Buttons
YO Power is equipped with one reset button inside the device on the PCB board under the
inscription “reset” shown on the figure 1. It is possible to press it with a thin stick.
www.yo sensi . io