YOSensi YO Power, Руководство пользователя

Страница: 18 / 28

YO Power User guide v4.0 page 18/28
DEVICE PARAMETERS
NAME DESCRIPTION POSSIBLE
VALUES
DEFAULT
VALUE
READ
/WRIT
E
measinterval Measuring and sending interval
LoRa [s]
1–999999 300 R/W
measthreshold Measurement threshold for each
channel
1-9999 10 R/W
ch1cttype —
ch6cttype Number of channels with different
possible CT clamps. 50mA-100 A,
40mA-160 A,
50mA-200A,
50mA-400A,
50mA-600A,
50mA-800A,
50mA-1000A
50mA-100A R/W
Parameters description
- nwktype: used for setting the device in public or private network type.
- acttype: used for setting the device in ABP or OTAA mode.
- deveui, … , appskey: predefined addresses and keys, these parameters are generated using
multiple IDs specific to the particular MCU and are unique for each device.; they can be
changed if needed.
- interval: determines the interval of sending broadcast packets, used to connect to every BLE
receiver around the device.
- subband: used for setting the communication frequency sub-band in LoRaWAN.
- measinterval: measurement interval [s] between sending LoRa packets.
- measthreshold: measurement threshold for each channel. If the current value between the
previous measurement and the next differs by a value of ‘meastreshold’, it queues this data
for sending. The current difference is reported in subsequent LoRa packets along with the
measurement time.
- ch1cttype…ch6cttype: 6 different channels to which the current transducer clamps can be
connected. For correct measurements and measuring ranges, the possible value must
coincide with the sensor connected to the device.
www.yo sensi . io