3
YHVP
YHVP
Serie
Versions and Main components
YHVP MODELS WITHOUT ELECTRIC HEATER
All versions are available without valves, with 2 way valve or with 3 way valve fitted in the unit.
There are four sizes available in the following versions:
YHVP
without infra-red remote control and without valve
YHVP-2V
without infra-red remote control with fitted 2 way valve
YHVP-3V
without infra-red remote control with fitted 3 way valve
-----------------------------------------------------------------------------------
YHVP-T
with infra-red remote control and without valve
YHVP-T-2V
with infra-red remote control with fitted 2 way valve
YHVP-T-3V
with infra-red remote control with fitted 3 way valve
-------------------------------------------------------------------------------
YHVP-MB
with MB electronic board and without valve
YHVP-MB-2V
with MB electronic board with fitted 2 way valve
YHVP-MB-3V
with MB electronic board with fitted 3 way valve
CONSTRUCTIONAL FEATURES OF THE MAIN COMPONENTS
Casing
Made of auto-extinguishing ABS UL94 HB plastic with high specifications and great resistance to aging.
The diffusion flap is adjusted manually in YHVP version, with remote control in YHVP-T version and with JTM-B control in YHVP-
MB version.
Air Filter
Washable-regenerable synthetic filter, readily accessible.
Fan Assembly
Made of plastic tangential fan.
Electric motor
The motor is for single phase supply and has six speeds, three of which are connected, with capacitor. The motor is fitted on
sealed for life bearings and is secured on anti-vibration and self-lubricating mountings. Internal thermal protection with automatic
reset, protection IP 20, class B. The speeds connected in the factory are indicated by “MIN, MED and MAX” in the following
tables.
Heat exchange coil
It is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an expansion
process. The coil has two 1/2 inch BSP internal connections and 1/8 inch BSP air vent and drain.
The heat exchanger is not suitable for use in corrosive atmosphere or in environments where aluminium may be subject to
corrosion.
The connections are on the left side facing the unit only.
Condensate Collection Tray
Made from polypropylene; the outside diameter of the condensate discharge pipe is 16mm.
Installation template
A cardboard installation template is supplied with every unit to help the mounting on the wall.
Содержание YHVP
Страница 38: ......
Страница 40: ...YHVP 04 16 CODE 99A4250142 E 04 16 ...