manualshive.com logo in svg

York YCAL0080SC, Установка, эксплуатация и обслуживание, Страница: 73 / 136

Поделиться
Скачать
York YCAL0080SC Скачать руководство пользователя страница 73

YORK INTERNATIONAL

73

FORM 150.62-NM1

The Entry Keys allows the user to view, change  pro-
grammed values. The ENTRY keys consist of  an UP
ARROW key, DOWN ARROW key, and an ENTER/ADV
key.

UP AND DOWN ARROW KEYS

Used in conjunction with the OPER DATA and HISTORY
keys, the UP and DOWN arrow keys allow the user to
scroll through the various data screens. Refer to the
section on “Display/Print” keys for specific information
on the displayed information and specific use of the
UP and DOWN arrow keys.

The UP and DOWN arrow keys are also used for pro-
gramming the control panel such as changing cooling

“ENTRY” KEYS

setpoints, setting the daily schedule, changing safety
setpoints, chiller options, and setting the clock.

ENTER/ADV key

The ENTER key must be pushed after any change is
made to the cooling setpoints, daily schedule, safety
setpoints, chiller options, and the clock. Pressing this
key “enters” the new values into memory.  If the EN-
TER key is not pressed after a value is changed, the
changes will not be “entered” and the original  values
will be used to control the chiller.

Programming and a description on the use of the UP
and DOWN arrow and ENTER/ADV keys are covered
in detail under the SETPOINTS,  and UNIT keys.

00068VIP

2

Содержание YCAL0080SC









































































































































Отзывы:

Нет отзывов