York YCAL Series Скачать руководство пользователя страница 115

Страница: 115 / 174

FORM 150.66-NM3

ISSUE DATE: 09/25/2020

115

JOHNSON CONTROLS

SECTION 7 - UNIT CONTROLS

The ENTRY keys allows the user to view, change pro-

grammed values. The Entry keys consist of an ↑ (UP)

arrow key, ↓ (DOWN) arrow key, and an ENTER/

ADV key.

Up and Down Arrow Keys

Used in conjunction with the OPER DATA, HISTORY,

COOLING SETPOINTS, SCHEDULE/ADVANCE

DAY, OPTIONS and CLOCK keys, the ↑ (UP) and ↓

(DOWN) arrow keys allow the user to scroll through

the various data screens.

Refer to the section on

DIS-

PLAY/PRINT KEYS

for specific information on the dis

played information and specific use of the ↑ (UP) and ↓

(DOWN) arrow keys.

The ↑ (UP) arrow key and ↓ (DOWN) arrow key are

also used for programming the control panel such as

changing numerical or text values when programming

cooling setpoints, setting the daily schedule, changing

safety setpoints, chiller options, and setting the clock.

ENTRY KEYS

Enter/Adv Key

The ENTER/ADV key must be pushed after any change

is made to the cooling setpoints, daily schedule, safety

setpoints, chiller options, and the clock. Pressing this

key “enters” the new values into memory. If the EN-

TER/ADV key is not pressed after a value is changed,

the changes will not be “entered” and the original val-

ues will be used to control the chiller.

Programming and a description on the use of the ↑ (UP)

arrow key, and ↓ (DOWN) arrow, and ENTER/ADV

keys are covered in detail under the SETPOINTS, and

UNIT keys.

00068VIP

Содержание YCAL Series















































































































































































Результаты поиска

Содержание YCAL Series

Отзывы:

Похожие инструкции для YCAL Series

Бренды по названию

Популярные бренды

York YCAL Series, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание YCAL Series

Отзывы:

Похожие инструкции для YCAL Series

Бренды по названию

Популярные бренды