York MILLENNIUM YIA-ST-1A1 Скачать руководство пользователя страница 98

Страница: 98 / 118

YORK INTERNATIONAL

FORM 155.16-O3

5. Press the ADVANCE DAY/SCROLL key. The follow-

ing prompt message is displayed.

REPEAT MON SCHEDULE MON-FRI? YES=1, NO=2

a. If you press the “1” Entry key, Monday’s start and

stop time will be automatically entered for Tuesday
through Friday.

– or –

b. If you press the “0” Entry key, Tuesday through

Friday can be programmed with different start and
stop times.

6. Use the ADVANCE DAY/SCROLL key with proce-

dure in Step 2. To enter start and stop times for re-
mained of the week plus a holiday schedule is re-
quired.

7. Press and release the ENTER key.

PROGRAM MODE, SELECT SETPOINT

is displayed.

To enter HOLIDAY setpoint. (Refer to Fig. 9.):

1. Press and release the HOLIDAY setpoint key. The

following program prompt message is displayed:

S M T W T F S HOLIDAY NOTED BY *

2. Press and release the ADVANCE DAY/SCROLL key

to move cursor to the day that you wish to designate
as a holiday.

3. Press the “

” key. An “

” will appear next to the se-

lected day.

FIG. 8 –

KEYPAD – PROGRAMMING “DAILY
SCHEDULE” SETPOINT

4. After you have placed an “

” next to each of the days

that you wish to designate a holiday, press the EN-
TER key

PROGRAM MODE, SELECT SETPOINT

message is dis-

played.

To cancel all of the designated holidays: perform Step
1, press the CANCEL key, and then press the EN-
TER key. The

PROGRAM MODE, SELECT SETPOINT

mes-

sage is displayed.

To cancel one of the designated holidays: perform
Step 1, press ADVANCE DAY/SCROLL key until the
cursor appears to the right of the desired day, press
the “

” key, then press the ENTER key.

To enter REMOTE/RESET TEMP RANGE setpoint. (Re-
fer to Fig. 10.):

1. Press and release the REMOTE/RESET TEMP

RANGE setpoint key. The following program prompt
message is displayed:

REMOTE/RESET TEMP RANGE = XX°F

2. Use the Entry keys to enter desired value (10 or 20).

3. Press and release the ENTER key.

PROGRAM MODE, SELECT SETPOINT

message is dis-

played.

FIG. 9 –

KEYPAD – PROGRAMMING “HOLIDAY”
SETPOINT

28342A(D)

3,5,6

28342A(D)

Содержание MILLENNIUM YIA-ST-1A1























































































































Результаты поиска

Содержание MILLENNIUM YIA-ST-1A1

Отзывы:

Бренды по названию

Популярные бренды

York MILLENNIUM YIA-ST-1A1, Руководство по эксплуатации

Результаты поиска

Содержание MILLENNIUM YIA-ST-1A1

Отзывы:

Бренды по названию

Популярные бренды