![background image](http://html1.mh-extra.com/html/york/21rt-47rt/21rt-47rt_installation-operation-and-maintenance-manual_3494818047.webp)
Operation instructions of wire controller
44
4.9.3 Inquiry function
4.9.3.1 Fault inquiry function
Function keys:
,
,
,
Operation steps:
a)
Conditions to enter the fault inquiry
In daily display state, long press
+
for more than 5 seconds to enter the
fault inquiry state
b)
Display description for fault inquiry
Daily fault display:
flashes,
Display the latest fault code at the temperature display place
Display of the fault inquiry:
long bright indicates that the current operation is the unit’s fault inquiry; the
temperature display area will flash and display the fault code, and the temperature value
and temperature unit will no longer be displayed.
The time display area flashes the time when the fault occurred.
The code number display area will display the module number by tens digits, and the
single digit will display the fault number (0~9, A(10), b(11), c(12), d(13), E(14), F (15).
If there is no fault record:
Code number display area will flash the display of “FF”
c)
It can only store up to 16 alarm messages, the time of fault and the operating status
d)
Operation
Press
or
to inquiry the fault information that occurred.
Press
to inquiry the fault from the latest to the earliest order
Press
to inquiry the fault from the earliest to the latest order.
Code number
display area
Display fault number
Temperature
display area
Display fault code
Clock display area
Display the system time when the alarm occurred
Status display area
State when the fault occurred
Operation mode
display area
Mode when the fault occurred
e)
Exit condition for fault inquiry
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz