![background image](http://html1.mh-extra.com/html/york/21rt-47rt/21rt-47rt_installation-operation-and-maintenance-manual_3494818042.webp)
Operation instructions of wire controller
39
4.9.2.2 Timing setting function
Function keys:
,
,
,
,
,
Operation steps:
a)
Conditions for entering the timing setting
In the daily display state, long press
key for 5 senconds, then it enters the timed
setting state to read the timing setting value into the register.
At this time, the
and “SET” icon will display in clock display area, and “ON” icon
starts flashing.
The hour area displays the hour value that was originally set on at the scheduled time. If
there is no set value, the default value is 00.
The minute area displays the minute value that was originally set on at the scheduled time.
If there is no set value, the default value is 00.
b)
Timing setup process
The timing setting process is as follows:
Timing ON Settings -> Timing OFF Settings -> Timing Mode Settings -> (Weekly
Settings for Air Conditioning Timing) -> Timed ON Settings
When the timing setting is on,
and the “SET” icon will display in the clock
display area, and the ON starts flashing;
When the timing setting is off,
and the “SET” icon will display in the clock
display area, and OFF will falsh;
When the timing mode is set, the original timing mode setting shall be flashed. The
default value shall be ONCE.
c)
Time setting for timing ON and OFF
Press
to select the hour or minute, and the selected object will flash (can be
cycled)
Press
or
to modify the time required modification.
Short press key, increase or decrease 1 each time,
Long press : automatically increase or decrease 5 in every second
Press
to save the new settings and automatically transfer to the next setting object.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz