York Fitness G510, Инструкция по эксплуатации

Страница: 13 / 36

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
INSTRUCTION
11
Locate the
LAT PULL CABLE
(88) with threaded bolt
and route as shown. Fix a
SNAP LOCK HOOK
(60)
to the end with the ball stop.
(NOTE: Fix the pulley assemblies in place once cable is
routed - this may save them having to be removed
and re-located.)
Locate and fit all
PULLEY WHEEL
(83) +
PULLEY
WHEEL COVER ASSEMBLIES
(84) as shown using fixings
(Nuts / Bolts / Washers etc) as detailed.
When fitted correctly pulley covers will protect you from potential
squeeze points ensure that the cable enters and exits from the pulley
through the channels provided in the pulley covers.
Ensure
PULLEY WHEEL SPACERS
(54) are fitted where illustrated.
Locate 1 x
ADJUSTABLE PULLEY BRACKET
(23) and
the fixings to assemble the central pulley assembly.
Ensure that the cables are located in the grooves where they
enter and exit the pulley.
Pulley cover
wrong
Pulley cover
right
Not inside
slot
Exit
point
Entry
point
11.5mm LONG
SPACER x
4
54
34
M10 x 50mm HEX HEAD BOLT x
4
32
M10 x 65mm HEX HEAD BOLT x
2
48
M10 NYLON
LOCKNUT x
6
49
M10 x 23mm x 2mm
FLAT WASHER x
12
SPACER
ADJUSTABLE
PULLEY BRACKET
THREAD THIS
END FIRST
YORK G510 / 11