Yokota YZ-T800A, Руководство пользователя

Страница: 6 / 14

7 Pulse interval: longer
8 Tool output : lower
9 Pulse interval : shorter
Never adjust fully at max or min, always at least 60 degrees from min and max.
Using the Programming Console PC-1
​Connect the PC-1 with cable CC-1 to the tool.
Programming Console PC-1
1 Mounting hole
2 Display screen Displays tightening result, setting item and set value
3 Function key Switching of tightening screen, setting screen and or of display screen
4 Numeric key Enter the set value
5 CAN key Return to the previous screen
6 ENT key Determine items and input value
7 Up, down, left and right key Move the selection of setting items up and down
8 PRC05 connector Cable connector
​Start Screen
​After connecting the PC-1 with cable CC-1 to the YZ-T tool it will take approx. 5 seconds for the PC-1 to start up, please see below following screens: