YOKOGAWA YPP6300, Инструкция по эксплуатации

Страница: 71 / 100

Model YPP6300 Pulse Input Rate/Totalizer Instruction Manual
71
Advanced Features Menu & Display Messages
The following table shows the functions and messages of the Advanced
Features menu in the order they appear in the menu.
Display Parameter Action/Setting
Gate
Gate Enter Gate function menu
Lo G Low gate
Program Low gate value
Hi G
High gate Program High gate value
filter Filter
Enter the Filter menu
Lo Spd
Low speed Set the contact de-bounce filter value
Hi Spd High speed Select high speed filter
seriAl
Serial Set serial communication parameters
SlaveId Slave ID Set slave ID or meter address
baud
Baud rate Select baud rate
Tr dLY Transmit delay Set transmit delay for serial communication
Parity Parity
Select parity
Even, Odd, or None with 1 or 2 stop bits
t-byt
Time byte Set byte-to-byte timeout
SelEct Select Enter the Select menu (function, cutoff, out)
Functn Signal input
conditioning Select linear only, other functions are not
applicable to pulse input
Linear Linear
Set meter for linear function and select
number of linearization points
No PtS
Number of
points Set meter for 2 to 32-point linearization
CutofF Cutoff
Set low-flow cutoff
AoutPr
Analog output
programming Program analog output parameters
Source
Source Select source for the 4-20 mA output
O-rang Overrange
Program mA output for display overrange