YOKOGAWA YPP6300, Инструкция по эксплуатации

Страница: 92 / 100

Model YPP6300 Pulse Input Rate/Totalizer Instruction Manual
92
Display Parameter Action/Setting Description
Inp 2 Input 2 Calibrate input 2 signal or program input 2
value (up to 32 points)
Input Input Input selection
LatCH
Latching Set relay for latching operation (relays
assigned to rate)
LED t
LED test Test all LEDs
Length Length Not applicable
Linear
Linear Set meter for linear function and select
number of linearization points
Lit gt
Grand total on
little display Assign the digital input to display the grand
total on the little display
Lit Hi
Max on little
display Assign digital input to display max on the
small display
Lit HL
Max/min little
display Assign the digital input to toggle max/min
on the small display
Lit Lo
Min on little
display Assign digital input to display min on the
small display
Little
Little display To assign the small display parameters
locd Locked Enter password to unlock meter
Lt-CLr
Latching-cleared Set relay for latching operation with manual
reset only after alarm condition has cleared
(relays assigned to rate)
mAn Manual
To manually control
mAx
Maximum Program maximum mA output allowed
mbus Modbus Select to display Modbus input or to assign
Modbus input as the analog output source
menu Menu button Assign digital input to Menu button
min
Minimum Program minimum mA output allowed
No PtS Number of points Set meter for 2 to 32-point linearization
nonrst Non-resettable
Non-resettable grand total set after entering
“050873” for Gtotal password
O Hold Relays output
hold
Assign digital input to hold all relays state