manualshive.com logo in svg

YOKOGAWA WT3001E, Руководство пользователя, Страница: 46 / 179

Поделиться
Скачать
YOKOGAWA WT3001E Скачать руководство пользователя страница 46

6-2

IM WT3001E-17EN

Command

Function

Page

:CBCycle:SYNChronize:SLOPe

Sets the slope of the synchronization source of Cycle by Cycle measurement 

or queries the current setting. 

6-22

:CBCycle:SYNChronize:SOURce

Sets the synchronization source for Cycle by Cycle measurement or queries 

the current setting. 

6-23

:CBCycle:TIMEout

Sets the timeout value for Cycle by Cycle measurement or queries the 

current setting. 

6-23

:CBCycle:TRIGger?

Queries all settings related to triggers or queries the current setting. 

6-23

:CBCycle:TRIGger:LEVel

Sets the trigger level or queries the current setting. 

6-23

:CBCycle:TRIGger:MODE

Sets the trigger mode or queries the current setting. 

6-23

:CBCycle:TRIGger:SLOPe

Sets the trigger slope or queries the current setting. 

6-23

:CBCycle:TRIGger:SOURce

Sets the trigger source or queries the current setting. 

6-23

 

COMMunicate Group

:COMMunicate?

Queries all settings related to communications.

6-24

:COMMunicate:HEADer

Sets whether to add a header to the response to a query (example 

DISPLAY:MODE NUMERIC) or not add the header (example NUMERIC).

6-24

:COMMunicate:LOCKout

Sets or clears local lockout.

6-24

:COMMunicate:OPSE(Operation 

Pending Status Enable register)

Sets the overlap command that is used by the *OPC, *OPC?, and *WAI 

commands or queries the current setting.

6-24

:COMMunicate:OPSR?(Operation 

Pending Status Register)

Queries the value of the operation pending status register.

6-24

:COMMunicate:OVERlap

Sets the commands that will operate as overlap commands or queries the 

current setting.

6-24

:COMMunicate:REMote

Sets remote or local. ON is remote mode.

6-24

:COMMunicate:STATus?

Queries line-specific status.

6-25

:COMMunicate:VERBose

Sets whether to return the response to a query using full spelling (example 

:INPUT:VOLTAGE:RANGE:ELEMENT1 1.000E+03) or using abbreviation 

(example :VOLT:RANG:ELEM 1.000E+03).

6-25

:COMMunicate:WAIT

Waits for one of the specified extended events to occur.

6-25

:COMMunicate:WAIT?

Creates the response that is returned when the specified event occurs.

6-25

 

CURSor Group

:CURSor?

Queries all settings related to the cursor measurement.

6-26

:CURSor:BAR?

Queries all settings related to the cursor measurement of the bar graph 

display.

6-26

:CURSor:BAR:POSition<x>

Sets the cursor position (order) on the bar graph display or queries the 

current setting.

6-26

:CURSor:BAR[:STATe]

Turns ON/OFF the cursor display on the bar graph display or queries the 

current setting.

6-26

:CURSor:BAR:{Y<x>|DY}?

Queries the cursor measurement value on the bar graph display.

6-26

:CURSor:FFT?

Queries all settings related to the cursor measurement on the FFT waveform 

display.

6-26

:CURSor:FFT:POSition<x>

Sets the cursor position on the FFT waveform display or queries the current 

setting.

6-26

:CURSor:FFT[:STATe]

Turns ON/OFF the cursor display on the FFT waveform display or queries 

the current setting.

6-27

:CURSor:FFT:TRACe<x>

Sets the cursor target on the FFT waveform display or queries the current 

setting.

6-27

:CURSor:FFT:{X<x>|DX|Y<x>|DY}?

Queries the cursor measurement value on the FFT waveform display.

6-27

:CURSor:TRENd?

Queries all settings related to the cursor measurement of the trend display.

6-27

:CURSor:TRENd:POSition<x>

Sets the cursor position on the trend display or queries the current setting.

6-27

:CURSor:TRENd[:STATe]

Turns ON/OFF the cursor display on the trend display or queries the current 

setting.

6-27

:CURSor:TRENd:TRACe<x>

Sets the cursor target on the trend display or queries the current setting.

6-27

:CURSor:TRENd:{X<x>|Y<x>|DY}?

Queries the cursor measurement value on the trend display.

6-27

:CURSor:WAVE?

Queries all settings related to the cursor measurement on the waveform 

display.

6-28

:CURSor:WAVE:PATH

Sets the cursor path on the waveform display or queries the current setting. 6-28

:CURSor:WAVE:POSition<x>

Sets the cursor position on the waveform display or queries the current 

setting.

6-28

6.1  List of Commands

Содержание WT3001E




















































































































































































Отзывы:

Нет отзывов