YOKOGAWA VZ20X, Техническая информация

Страница: 21 / 55

2.1 Outline

Settings and Items to Check Before Starting

Before connecting GA10, use VZ Configurator to configure items
such as the VZ20X communication settings. When using multiple
VZ20X units and performing time synchronization, configure the
settings described in section 2.2.

Select [Detail Settings] for the GA10 setting mode.

In the procedure described here, [Device time] is specified for the
[Data time] setting in the GA10 data acquisition conditions. When
using the data merge function (GA10 with option code /DM), the
setting is forcibly set to [Device time]. (See section 2.3.)
For details on using the [PC time] setting and the restrictions that
apply, see section 2.4.

For details on basic operations, refer to the GA10 User's Manual.
2.2 VZ20X Time Synchronization Settings
1. For [Connection type] in the VZ20X [Time
synchronization] setting, select either
[Master unit of daisy chain], [Relay unit
of daisy chain], or [Terminal unit of daisy
chain].
2. In order to register VZ20X units to GA10
when using time synchronization, the
“Main unit status LED” on the VZ20X units
must appear as indicated below.
On the master unit, the LED is green when
performing GA10 registration. On the relay
unit and terminal unit, the LED is green
when establishing time synchronization.
Master unit of daisy chain: Blue or green
Relay unit of daisy chain: Green
Terminal unit of daisy chain: Green
Master unit of
daisy chain
Relay unit of
daisy chain
Terminal unit of
daisy chain
Host device
21
TI 77V01B01-11EN Oct.18, 2021-00