6 - 21
IM 11G02M01-01E
6.5.2 Forced stop of auto zero calibration
This mode is used to cancel the auto zero calibration forcedly.
1. In the User mode that is displayed, point
the cursor to “Setting of Auto Zero
Calibration” by pressing the
or
key. Press the
ENT
key.
2. In the “Setting of Auto Zero Calibration”
item selection screen that appears, point
the cursor to “Stop Auto Zero Calibra-
tion” by pressing the
or
key.
Press the key.
3. “Stop Auto Zero Calibration” is inverted.
A message appears, prompting you to
verify that you want to cancel or continue
auto zero calibration. To cancel the auto
zero calibration forcibly, press the
ENT
key. If you press the
ESC
key, auto zero
calibration is cancel (not stopped).
(
)
ENT
(
)
ENT
