4-30
IM 04L51B01-41EN
Note
• * To apply the settings entered on the tabs of the Router configuration window to the wireless
communication router module, click
Save to module
, and then restart the module by turning the
power off and then back on.
• Entering zeros for the MH920 Console International settings causes those settings to be
deleted. Be sure to enter non-zero values in all the settings.
■ Saving default values (Save default button)
Click
Save default
after setting the terminal information to save the various values as
maintenance console’s default values.
The information on each of the Basic configuration, Communication setup, Packet filtering,
and Station number setup tabs and the Detailed view check box state are saved here.
The default values that are saved can be loaded into the corresponding settings in the
maintenance console by clicking
Load default
.
■ Loading default values (Load default button)
Click
Load default
to load the maintenance console’s default values and shows them in the
corresponding settings.
Load default loads the content of the file containing the maintenance console’s default
values. This file is automatically loaded when the Router configuration is opened.
Save default can be used to save the entered values as the maintenance console’s default
values. You can load the saved default values, change a portion of the settings, and use
them.
■ Saving the configuration file (Save Configuration button)
Click to
Save Configuration
after setting the terminal information to save the information
on each of the Basic configuration, Communication setup, Packet filtering, and Fixed route
setup tabs in a configuration file.
The file that is saved using Save Configuration can be loaded into the corresponding
settings in the maintenance console by clicking
Load Configuration
.
The configuration file is saved with the specified file name in the specified folder. By default,
the file is saved with the following file name in the following folder.
• C:\OKI\MH920 Console International\Setting_Files\RM_MAC address_date and time.csv
* The MAC address is set to 0000000000000000 if the file is saved without a wireless
communication module connected.
■ Loading the configuration file (Load Configuration button)
Click
Load Configuration
to load a configuration file created in advance and show the
content of the file in the Maintenance console window. When a configuration file is loaded,
the information on each of the Basic configuration, Communication setup, Packet filtering,
and Fixed route setup tabs is loaded.
For details on the configuration file, see chapter 5, “List of Settings.”
■ Closing the Router configuration window
Click × in the upper right to return to the router configuration selection window.
You cannot close the Router configuration window while the wireless communication router
module is connected.
4.6 Configuring Router Modules
