YOKOGAWA ROTAMETER RAMC Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 49

YOKOGAWA ROTAMETER RAMC Скачать руководство пользователя страница 47

<APPENDIX 2. APPLICATION, SETTING AND CHANGE OF BASIC PARAMETERS>

A-12

All Rights Reserved. Copyright © 2006, Rota Yokogawa

IM 01R01B02-01E-E 5th edition October 01, 2020-00

A2.2 Setting and Change of Basic Parameters

This section describes the procedure taken to set and change the parameters for each block. Obtaining

access to each parameter differs depending on the configuration system used. For details, refer to the
instruction manual for each configuration system.

IMPORTANT

Do not turn the power OFF immediately after parameter setting. When the parameters are saved to the

EEPROM, the redundant processing is executed for the improvement of reliability. If the power is turned

OFF within 60 seconds after setting of parameters, changed parameters are not saved and may return to
their original values.

When the consecutive parameter setting to the multiple parameters is not executed via the acyclic data
exchange, the time interval between each parameter setting must not be within 2 seconds.

Changed parameters may not be written to the device.

Refer to the “List of parameters for each block of the RAMC” for details of the Write Mode for each block.

Set the Target of block mode (TARGET_MODE) back to „Auto“

Make setting or change in accordance to each parameter

Access the parameter to be set or changed

Set the Target of block mode (TARGET_MODE) to „AUTO“, „MAN“ or „O/S“
according to the Write Mode of the parameter to be set or changed

Access the block mode (TARGET_MODE) of each block*

* It is assumed that write protection is disabled. Otherwise disable write protection first.

«
...
45
46
47
48
49
»

Содержание ROTAMETER RAMC


















































Отзывы:

Нет отзывов