YOKOGAWA ROTAMETER RAMC Скачать руководство пользователя страница 23

Страница: 23 / 49

5. BLOCK SETTING

5-3

IM 01R01B02-01E-E 5th edition October 01, 2020 -00

5.4 Transducer Block (TB) Parameters

All important Transducer Block parameters are listed below and described with more details to guide through the
settings.

TARGET_MODE:

Indicates what mode of operation is desired for the Transducer Block. Two block modes are available:

•

Out of Service

(O/S)

• Auto (AUTO)

MODE_BLK:

The sub-parameter “Actual” indicates the actual mode which is one of the target modes. The actual mode

may differ from the target mode:

•

Out of Service

: sets the status of the Process Variables to “BAD…”

• Auto: Block function able to work.

NOMINAL_SIZE:

Shows the size of the flow tube in mm or inches.

NOMINAL_SIZE_UNIT:

Sets the unit of the flow tube size (in mm or inches).

VOLUME_FLOW_UNIT:

The units in table 5.5 are selectable. Presetting is determined by order.

LOW_FLOW_CUTOFF:

Sets low cut range for output. Setting range is 5 to 15 % of VOLUME_FLOW_HI_LIMIT or

MASS_FLOW_HI_LIMIT. Factory setting: “ 5 %”

VOLUME_FLOW:

Indicates the current measured value and status of the Process Variable (volumetric flow). This parameter is

an input to the AI Function Block, if a volumetric unit is selected on the scale.

MASS_FLOW_UNIT:

The units in table 5.5 are selectable. Presetting is determined by order.

MASS_FLOW

Indicates the current measured value and status of the Process Variable (mass flow). This parameter is an
default input to the AI Function block, if a mass flow unit is selected.

TEMPERATURE_UNIT

The unit in table 5.1 is determined by order and derived from the selected flow unit.

Table 5.1 Units for Indicator temperature

Unit Symbol

Unit Description

Unit Code

°C

Degree Celsius

1001

°F

Degree Fahrenheit

1002

Kelvin

1000

TEMPERATURE

Indicates the indicator temperature value as selected by TEMPERATURE_UNIT.

This parameter can not be used for cyclic communication on AI Function Block.

Содержание ROTAMETER RAMC


















































Результаты поиска

Содержание ROTAMETER RAMC

Отзывы:

YOKOGAWA ROTAMETER RAMC, Руководство пользователя, Страница: 23 / 49

Результаты поиска

Содержание ROTAMETER RAMC

Отзывы: