YOKOGAWA FA-M3V e-RT3 Plus, Руководство по оборудованию

Страница: 165 / 274

A3-5
IM 34M06C11-01E
A3.2.3 Mounting on and Removing from a DIN Rail
When mounting the FA-M3 on a DIN rail, attach a rail mount kit to the back of the
controller. For the rail mount kit, purchase either Model T9031AP (for F3BU04, F3BU06
and F3BU05 base modules) or Model T9031AQ (for F3BU09 and F3BU13 base
modules) separately. Note that F3BU16-0N, F3BU09-2N and F3BU13-2N are not
designed for mounting on a DIN rail.
 Installing a Rail Mount Kit
A rail mount kit comprises two component parts that are used in combination.
FA030204.VSD
（
A
） （
B
）
The number of components needed is shown below.
(A) X 1 and (B)

2 (for F3BU04, F3BU06 and F3BU05 base modules)
(A) X 2 and (B)

4 (for F3BU09 and F3BU13 base modules)

Mounting location (Rear of the controller)
（ B ）
（ B ）
（ B ）
（ A ）
（
A
）
（ B ）
FA030205.VSD

Mounting procedure
(1) Insert one of the hooks.
(2) Push in the other hook.
(1) Insert one of the hooks.
(2) Push in the other hook.
FA030206.VSD
For both components (A) and (B),
insert one of their hooks into the
opening in the DIN rail.
Then push in the other hook (use a
flat-blade screwdriver as
necessary).