YOKOGAWA DL1640, Руководство пользователя

Страница: 9 / 74

1-5
IM 701610-61E
1
I
2
C-Bus Signal Analysis Function
Note
When using binary (BIN) display, set the LSB using “R” (Read), “W” (Write), and “X.”
Setting the Data Pattern
11. Turn the jog shuttle to select Data Pattern.
12. Set the value in a similar fashion as described in steps 7 through 10.
13. Turn the jog shuttle to move the cursor to Condition of Data Pattern.
14. Press SELECT to select True or False.
15. Turn the jog shuttle to move the cursor to Position of Data Pattern.
16. Press SELECT to select First Byte or Anywhere.
Setting Whether to Ignore Restart Conditions
17. Turn the jog shuttle to move the cursor to Ignore the Restart Condition.
18. Press SELECT to select YES or NO.
Setting Whether to Ignore Start/Stop Conditions That Do Not Conform to the
Protocol
19. Turn the jog shuttle to move the cursor to Ignore Unexpected Start/Stop
Condition.
20. Press SELECT to select Yes or No.
Press ESC to close the dialog box.
• Setting the Trigger Level, Hysteresis, Trigger Coupling, and HF Rejection
21. Press the Level/Coupling soft key. The Level/Coupling dialog box appears.
Setting the Trigger Level
22. Turn the jog shuttle to move the cursor to the desired channel for setting the
trigger level (Level).
23. Press SELECT to display the level setup menu.
24. Turn the jog shuttle to set the value.
You can move between the digits using the arrow keys. Pressing RESET resets
the trigger level to 0.00 V.
25. Press SELECT to confirm the value.
Setting the Hysteresis
26. Turn the jog shuttle to move the cursor to the desired channel for setting the
hysteresis (Hys).
27. Press SELECT to select or .
1.3 Setting the Trigger Conditions