2-17
IM 701610-61E
SPI Bus Signal Analysis Function
2
2.5 Saving the Detailed Analysis Results
7.
Turn the jog shuttle to select the save destination medium (indicated by [ ]).
8.
Press SELECT to confirm the new medium.
Select the Destination Directory
(Perform this operation when directories are present on the medium.)
9.
Turn the jog shuttle to select the save destination directory (indicated by < >).
10.
Press SELECT to confirm the new directory.
The selected medium/directory is displayed in “Path=......” located above and to
the left of the File List menu.
Select <..> to move to the parent directory.
Setting the File Name
11.
Press the File Name soft key. The File Name & Comment dialog box appears.
12.
Turn the jog shuttle to move the cursor to the Auto Naming box.
13.
Press SELECT to select ON or OFF.
14.
Turn the jog shuttle to move the cursor to the File Name box.
15.
Press SELECT. A keyboard appears.
16.
Enter the file name according to section 4.1, “Entering Values and Character
Strings” in the
DL1620/DL1640/DL1640L User’s Manual IM 701610-01E
.
Press ESC to close the dialog box.
Note
Comments are not saved along with detailed analysis results so it is not necessary to enter
any.
Executing the Save Operation
17.
Press the Save Exec soft key. The data is saved to the directory indicated by
Path=...... At the same time, the Save Exec soft key changes to an Abort soft
key.
Aborting the Save Operation
18.
Press the Abort soft key. The save operation is aborted. At the same time, the
Abort soft key changes to a Save Exec soft key.