manualshive.com logo in svg

YOKOGAWA Daqstation DX1000N, Руководство пользователя, Страница: 57 / 75

Поделиться
Скачать
YOKOGAWA Daqstation DX1000N Скачать руководство пользователя страница 57

56

IM 04L41B01-02E

Power Supply Wiring

Panel Mount Type

Precautions to Be Taken While Wiring the Power Supply

This section explains the precautions to be taken on models whose rated supply voltage is
100 to 240 VAC.  Make sure to follow the warnings below when wiring the power supply.
To prevent electric shock and damage to the DX, observe the following warnings.

WARNING

• To prevent electric shock when wiring, ensure the main power supply is turned OFF.
• To prevent the possibility of fire, use 600 V PVC insulated wire (AWG20-16) or

an equivalent wire for power wiring.

• Make sure to earth ground the protective earth terminal through a grounding

resistance less than 100 

Ω

 before turning ON the power.

• Use crimp-on lug with insulation sleeves (for 4-mm screws) for power supply

wires and protective grounding wires.

• To prevent electric shock, make sure to close the transparent cover for the

power supply wires.

• Make sure to provide a power switch (double-pole type) on the power supply

line in order to separate the DX from the main power supply.  Put an indication
on this switch as the breaker on the power supply line for the DX and indications
of ON and OFF.  Switch specifications  Steady-state current rating: 1 A or more.
Inrush current rating: 60 A or more.  Complies with IEC60947-1, 3.

• Connect a fuse (between 2 A and 15 A) to the power line.
• Do not add a switch or fuse to the ground line.

Use a power supply that meets the following conditions:

Item

Condition

Rated supply voltage

100 to 240 VAC

Allowable power supply voltage range

90 to 132/180 to 264 VAC

Rated power supply frequency

50/60 Hz

Allowable power supply frequency range

50/60 Hz 

±

 2%

Maximum power consumption

45 VA (100 V)/60 VA (240 V)

Note

Do not use a supply voltage in the range 132 to 180 VAC, as this may have adverse effects on

the measurement accuracy.

Wiring Procedure

1

.

Turn OFF the power to the DX and open the transparent power terminal cover.

2

.

Wire the power cord and the protective ground cord to the power supply
terminals.  Use ring-tongue crimp-on lugs (designed for 4 mm screws).

Power cord

Functional ground terminal

Protective grounding cord

N

L

AC~

60VA MAX

50/60Hz

100-240V

Note

Do not wire the protective grounding 
cord to the functional ground terminal.

3

.

Replace the power terminal cover, and fasten it with screws.

Installation and Wiring

Содержание Daqstation DX1000N












































































Отзывы:

Нет отзывов