YOKOGAWA AQ7280 OTDR Скачать руководство пользователя

Страница: 31 / 75

IM AQ7280-02EN

Making Preparations for Measurements

Operating Precautions

Safety Precautions

If you are using this instrument for the first time, make sure to thoroughly read “Safety Precautions,” on pages 10 to 21.

Do Not Remove the Case

Do not remove the case from the instrument. Doing so is extremely dangerous. For internal inspection and adjustment, contact your

nearest YOKOGAWA dealer.

Unplug If Abnormal Behavior Occurs

If you notice smoke or unusual odors coming from the instrument, immediately turn off the power, unplug the power cord, and contact

your nearest YOKOGAWA dealer.

Use the AC Adapter and Power Cord Correctly

Do not place objects on top of the AC adapter or power cord, and keep them away from heat sources. When removing the plug from the

power outlet, do not pull on the cord. Pull from the plug. If the AC adapter or power cord is damaged, contact your nearest YOKOGAWA

dealer. Refer to page 3 to 6 for the part number to use when placing an order.

General Handling Precautions

Do Not Place Objects on Top of the Instrument

Never place objects such as other instruments or objects that contain water on top of the instrument. Doing so may damage the

instrument.

Do Not Subject the Inputs and Outputs to Mechanical Shock

If the I/O connectors or adapters are subjected to mechanical shock, they may be damaged. The instrument may not perform

measurements correctly due to damage or deformation that is not visible to the naked eye.

Do Not Scratch the LCD

Because the LCD can be easily scratched, do not allow any sharp objects near it. Also, do not apply vibration or shock to it. Furthermore,

do not apply strong shock to the LCD or place objects on top of it.

During Extended Periods of Non-Use

Unplug the power cord from the outlet. Remove the battery pack from the instrument.

When Carrying the Instrument

Remove the power cord and connecting cables. When carrying the instrument, grasp the protector or the attached strap firmly.

Содержание AQ7280 OTDR












































































Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды

YOKOGAWA AQ7280 OTDR, Руководство по началу работы

Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды