YOKOGAWA AQ4305 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 50

YOKOGAWA AQ4305 Скачать руководство пользователя страница 38

5.1

operating procedures

Chapter 5 Operating Procedures

5-2

5.1

operating procedures

Turning [POWER] on, then [POWER] LED puts on, [OUT], [LAMP] switches LED put on, and FAN
operating.

  Optical output control
  [OUT] switch control on/off the shutter. The shutter open and [OUT] LED put on ,turning    [POWER] on.
Then push [OUT] switch, the shutter close and [OUT] LED put out.

[LAMP] switch control on/off the lamp currents. The lamp lighting and [LAMP] LED put on ,turning
[POWER] on. Then push [LAMP] switch, the light out and [LAMP] LED put out.

If any abnormal situation occurs in the hardware during initialization processing, LED in

switches are not lighting.

If the fan does not work, lamp continue on and off. In this case, turn [POWER] off.

If these situations occur, the unit must be repaired. Contact our Service Dept., Sales
Dept., or nearest office immediately.
(

☛

Contact information is described at the end of the document.)

Caution

«
...
36
37
38
39
40
...
»

Содержание AQ4305



















































Отзывы:

Нет отзывов