manualshive.com logo in svg

YOKOGAWA AQ4305, Инструкция по эксплуатации, Страница: 28 / 50

Поделиться
Скачать
YOKOGAWA AQ4305 Скачать руководство пользователя страница 28

3.1 Turning the Power ON/OFF 

Chapter 3    Before You Start 

3-2 

3.1 Turning the Power ON/OFF 

The AQ4305 has a [POWER] switch for turning the power ON/OFF. Follow the procedures shown below to 
use ensure proper use. 

3.1.1 Preparations 

for 

Power-On 

Check the following before plugging the power cord into a power cord connector of this unit. 

z

 

Make sure the [POWER] switch on the front side of this unit is set to the [OFF] position. 

z

 

Make sure the voltage of the power outlet matches this unit’s supply voltage. 

z

 

Before replacing a fuse, always move the [POWER] switch to the [OFF] position and remove 
the power cord from the power outlet. 

(

☛

 See section Safety precaution; "5.1 Replacing Fuses") 

z

 

Make sure the location is not subject to heavy vibrations, high humidity or dust levels, or 
direct sunlight. Also make sure there is no risk of exposure to activated gas, and that this 
unit will not tilt or tip over. 

z

 

Make sure the lamp cover is setting. 

   

3.1.2 Power-On 

After performing the power supply and connection checks as described in subsection 3.2.1, follow 
the procedure shown below to turn on the power. 

① 

Connect the power cord to the power cord connector on the back side of the unit. 

② 

Move the [POWER] switch on the front side of this unit to the [ON] position. The LED next 
to the [POWER] switch on the front side turns on. 

③ 

Please perform xyz-axis adjustment if needed. 
For details of xyz-axis adjustment, see Chapter 4 Usage Preparations.   
(

☛  4.3 Xyz-axes Adjustment)

 

When the power is turned on, [OUT] LED turns on (shutter open) and [LAMP] LED turns 
on (lighting).   

 

3.1.3 Shutdown 

procedure  

① 

Move the [POWER] switch on the front side of the unit to the [OFF] position. 

② 

Remove the optical fiber cord from the [OPTICAL OUTPUT] connector, then screw the 
connector cap to the connector. 

③ 

Remove the power cord from the power outlet. 

 

 
 
 
 
 

 Caution 

z

 

If this is the first time you are using the AQ4305, or if this unit has been moved and was shaken 

considerably during the moving process, or after replacing  a lamp, execute the xyz-axis 

adjustment after the warmup period before proceeding. See Chapter 4 for information on the 
adjustment. (

☛

  See Chapter 4, Usage Preparations) 

Содержание AQ4305



















































Отзывы:

Нет отзывов