10-3
IM AQ1100-01EN
File Operation and Printing
1
2
3
4
5
6
7
8
9
10
11
12
Index
App
File Name Setup Screen
Set the file name format (No., Comment, C
No., No. + Comment).
Set the ID number (0 to 9999).
Specify a comment (up to 30 characters).
To enter a comment, follow the procedure in section 2.2.
File Name
The file name that is produced by the above settings is
displayed.
Explanation
Action
Select “Save” or “Load.”
The types of files that you can save are listed below.
File Type
Set the extension depending on the type of file that you want to save or load.
Saving
The types of files that you can save are listed below.
.CSV
A CSV format measurement data file
1
The measurement data (including measurement conditions such as the wavelength and offset) for the
specified core and tape numbers is saved.
• Optical power meter measurement data (see section 3.4)
• PON power meter measurement data (see section 4.3)
• Loss test results (see section 6.2)
• Loop-back loss test results (see section 6.3)
• Multicore loss test results (see section 7.3), project information (see section 7.1)
.LTS
File containing optical power meter measurement conditions, PON power meter measurement
conditions, and optical output conditions
.CFG
System setup data file
.BMP
BMP screen image data file
When you select “Save,” the screen image from
immediately before you switched to the file
operation screen is saved.
2
.PNG
PNG screen image data file
.JPG
JPG screen image data file
1 Logging results are also saved to CSV files. Logging results are saved in the file save screen that appears
after logging stops (see section 3.3).
2 “Screen Image Save” may appear on the menu. Press this soft key to save the image displayed by “Screen
Image Save” to the root directory of the internal memory with the file name SystemInfo.BMP.
Loading
The types of files that you can load are listed below.
.CSV
For details, see “Saving.”
.LTS
.CFG
Drive to Save To
You can set the destination drive to one of the following options.
Internal memory
This instrument internal memory
USB memory
The USB storage medium connected to the USB Type A port on this instrument.
Note
• Do not save files directly to the root directory. Create a folder, and save files to that folder. If there are
many folders in the root directory, it will take some time to save files to a folder that is at a lower level in
the folder hierarchy.
• You can create or save up to 256 files and folders in the root directory.
10.2 Saving and Loading Data
