YOKOGAWA Admag AXW, Руководство пользователя, Страница: 6 / 52

<1. INTRODUCTION>
1-3
IM 01E25D11-01EN
(4) Maintenance
WARNING
• Maintenance of the magnetic flowmeter should
be performed by the trained personnel having
knowledge of safety standard. No operator
shall be permitted to perform any operations
relating to maintenance.
• When opening the cover, wait for more than 10
minutes after turning off the power.
• Do not open the cover in wet weather or humid
environment. When the cover is open, stated
enclosure protection is not applicable.
• Always conform to maintenance procedures
outlined in this manual. If necessary, contact
Yokogawa.
• Care should be taken to prevent the build up
of dirt, dust or other substances on the display
panel glass or data plate. If these surfaces do
get dirty, wipe them clean with a soft dry cloth.
1.2 Warranty
• The terms of this instrument that are
guaranteed are described in the quotation.
We will make any repairs that may become
necessary during the guaranteed term free of
charge.
• Please contact our sales office if this instrument
requires repair.
• If the instrument is faulty, contact us with
concrete details about the problem and the
length of time it has been faulty, and state the
model and serial number. We would appreciate
the inclusion of drawings or additional
information.
• The results of our examination will determine
whether the meter will be repaired free of
charge or on an at-cost basis.
n
The guarantee will not apply in the
following cases:
• Damage due to negligence or insufficient
maintenance on the part of the customer.
• Problems or damage resulting from handling,
operation or storage that violates the intended
use and specifications.
• Problems that result from using or performing
maintenance on the instrument in a location
that does not comply with the installation
location specified by Yokogawa.
• Problems or damage resulting from repairs or
modifications not performed by Yokogawa or
someone authorized by Yokogawa.
• Problems or damage resulting from
inappropriate reinstallation after delivery.
• Problems or damage resulting from disasters
such as fires, earthquakes, storms, floods, or
lightning strikes and external causes.
n
Trademarks:
ADMAG and AXW are registered trademarks of
Yokogawa Electric Corporation.
Company names and product names used
in this material are registered trademarks or
trademarks of their respective owners.
1.3 Combination Remote
Converters
IMPORTANT
• The AXW remote flowtube (size 500 (20
in.) to 1800 mm (72 in.)) should be used in
combination with AXFA11 remote converter.
Contact Yokogawa before using it in
combination with converters other than
AXFA11.