4-3
IM 2553A-01EN
SETUP
Menu
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.2 Using the SETUP Menu
This section provides an overview of how to use the SETUP menu. For detailed explanations of how to
configure individual functions with the SETUP menu, see the relevant sections.
When the SETUP menu is displayed, only the dials and switches for setting and displaying the menu
items can be used. (Other dials and switches are disabled.) Also, displays that are not used in the
SETUP menu do not turn on.
RANGE dial
Displays the SETUP menu
Displays the menu specified by turning the output setting dials.
At levels where a value is set or displayed, these display the value.
Output setting dials
Displays auxiliary information
Displays the auxiliary information on the SETUP menu.
(auxiliary numbers in IP-address-related and LOGIC menus,
unit for settings that require it, etc.)
Displays polarity or the most significant digit
At levels where a value is set or displayed, this di, –, or 1 when the polarity or the
most significant digit needs to be displayed.
POLARITY switch
The display blinks if the setting has not
being confirmed. To confirm, flip the
POLARITY switch down.
RANGE Dial
First, to enter the SETUP menu, use this dial to select
SETUP
.
Output Setting Dials
You can use any of the output setting dials to set the menu items. However, these dials operate
separately in the following situations.
• When a value is being set, each dial sets the value of the digit immediately above it. Carrying over
and borrowing occur automatically within the selectable range.
• At the menu level for switching the auxiliary information display, the right-most output setting dial is
used to switch the display.
