Yokis Thermarp, Инструкция по установке, программированию и использованию

Страница: 16 / 40

DS1054-057
P1
7.5.1. Operating mode
This parameter can be used to specify the operating mode of the thermostat between winter/heating and
summer/cooling .
7.5.2. Adjustment mode type for heating
For the heating operation mode, you can choose between on/off control (rEG 0) or proportional control
(rEg P).
7.5.3. Adjustment parameters
In the case of on/off adjustment (rEG 0), the only parameter to be set is the differential (dIF), which can assume
values between 0.1°C and 1°C (parameter to be set also for cooling mode).
In the case of
proportional control (rEg P), the parameters to be set are the control band (bnd) and the control
period (PEr).
Note:
The presettings are suitable for most situations. Change these settings only when actually needed.
The difference between the two types of adjustment is summarised here.