Yokis E2BPP, Руководство пользователя

Страница: 9 / 32

Press the pushbutton to be connected on the
transmitter (E) 5 times**.
The transmitter LED will start flashing for 30
seconds, indicating that the system is waiting
for connection.
** Each press must last less than 0.7 seconds
Briefly press the pushbutton in the ‘connect’ hole
of the receiver (R) (on the front or the back of the
receiver) with the point of a pencil while the
transmitter LED is flashing.
The transmitter LED will stop flashing.
Warning: the receiver must be powered.
D I R E C T M O D E
technical specifications:
- CR2032 Lithium battery (included)
- Battery life > 7 years
- Max. 4 receivers per transmitter button
- Operating temperature: from -10 to + 50°C
- IP54 protection
- Max. relative humidity 80%
- Frequency: 2,4 GHz
- Transmission: two-way
RADIO TRANSMITTERS
1
2
Simply repeat the same procedure
to delete a connection
Switches can be used instead of pushbuttons to drive Mtr2000ErP
receivers . In this case, switch 5 times rapidly (not 10!) instead of using the 5
press sequence. Repeat the connection procedure by pressing 5 times to use a
pushbutton again instead of the switch.
the LEd will light up on transmitters
only if radio transmission was successful
The E2BPP/E4BPP may be wired behind pushbuttons (or switches) of any model.
Wiring both channels is not indispensable: a single pushbutton can be used con-
nected to a single channel.
all YoKiS transmitters are compatible with
YoKiS receivers
(relays, dimmer and Shutter Modules).
radio raNGE:
Standard range:
• In the same room (< 100 m²)
• 50m in open range
(Range may be reduced by presence of metallic
elements, crossing of walls or partitions)
Power range:
• Inside 100m² apartments with perpendicular
crossing of main wall or ceiling
• 250m in open range
(Range may be reduced by presence of metallic
elements, crossing of walls or partitions)
radio traNSMiSSioN:
the transmitter LEd lights up only if radio
transmission was successful.
Adding an intermediate receiver will allow to solve a
problem of insufficient range (see § “How to increase
the range”).
DS1054-009I
E2BPX 5454408 2-channel transmitter with external aerial
tLC8C 5454403 8-pushbutton remote control
POWER RANGE
E2BPP 5454413 2-channel flush-mounted POWER transmitter
E2BPPX 5454414
2-channel flush-mounted POWER transmitter
POWER with external aerial
E4BPP 5454427 4-channel flush-mounted POWER transmitter
E4BPPX 5454428 4-channel flush-mounted POWER transmitter
with external aerial
TLC4CP 5454425 4-pushbutton POWER remote control
TLC8CP 5454423 8-pushbutton POWER remote control
GALET8TP 5454424 8 pushbutton flat POWER remote control
GALETBOISP 5454426 8 pushbutton deluxe flat POWER remote control
TLM1T45P 5454417
1-pushbutton wall-mounted POWER remote
control
TLM2T45P 5454419
2-pushbutton wall-mounted POWER remote
control
TLM4T45P 5454421
4-pushbutton wall-mounted POWER remote
control
TLC1TP 5454430 1-pushbutton Power remote control of Design
TLC2TP 5454431 2-pushbutton Power remote control of Design
TLC4TP 5454432 4-pushbutton Power remote control of Design
GALET4TP 5454433
4-pushbutton flat POWER remote control of
Design
P8
GB
WARNING: Explosion risk if the battery is replaced with a battery other
than the referred one. Dispose of the used batteries as per local stan-
dards.
E2BPP E4BPP