Ykk ap YES 45 FS, Руководство по установке

Страница: 14 / 36

02-4001-09 | Effective Date: May 29, 2018
Page-10
YES 45 FS/FI Storefront System
STEP 2 (Continued)
FABRICATE TUBULAR VERTICALS FOR SHEAR BLOCK ASSEMBLY
YES 45 FS & YES 45 FI:
-Cut the vertical and jamb members to the frame height determined in Step 1.
-Tubular verticals require shear blocks for the attachment of head, horizontal and sill members:
E1-1012 for YES 45 FS.
E1-1013 for YES 45 FI.
Note: Open back horizontals, E9-1004 (YES 45 FS) and E9-1014 (YES 45 FI),
and sills, E9-1069 (YES 45 FS) and E9-1089 (YES 45 FI), must be used
when using shear blocks.
-Mark the location for each shear block using one of the methods below:
1. Use a short piece of each horizontal member with a shear block installed as a template.
Center the template on the face of the vertical and mark each hole location.
2. Layout the shear blocks as shown in Detail 5 .
-Drill a 0.161” diameter hole (#20 drill bit) at each location marked.
-Attach the shear blocks to the verticals using three (3) PC-1028 fasteners.
FRAME FABRICATION
Top of
Horizontal
Top of
Horizontal
0.161” Dia.
Holes (Typ.) 0.161” Dia.
Holes (Typ.)
INTERIOR EXTERIOR
YES 45 FS YES 45 FI
INTERIOR EXTERIOR
1-1/4”
1/2”
1-3/8” 3/4”
3-1/8” 3-1/4”
1-1/2”
5/16”
5/16”
1-1
1/16”
1/2”
1-1/2”
1-1/4”
1/2”
1-1/4”
1/2”
CL
CL
Detail 5