Yeti SMARTBENCH, Быстрый старт

Страница: 7 / 22

SMARTBENCH V1.0
Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: +44 1275 390721 | Email: support@yetitool.com
6
Attach the
Z Head
1
Slide the
Z Head
(
Figure 1
, page 2) onto the
X
Fit
Beam Upper
ensuring the orientation as shown.
2
the cable connector latch plate to the
Z Head
carriage plate as shown.
3
Secure in place using the thumbscrew. Ensure the Con
cable is tucked into the recess on the plate.
5 6
4
nect the
Z Head
signal cable and secure using
the thumb screw.
Repeat for the power cable connector. Co nnect the extraction hose to the
Z Head
. The
arrow denotes to location of the lug.