Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
12
CNC
STYLUS
–
QUICK
START
GUIDE
V1.1
7
Vinyl cutting
7.1
Materials
7.1.1
Self-adhesive vinyl
Self-adhesive vinyl comes in many different types which vary in thickness, colour and
finish. Adhesive vinyl is cut with the vinyl facing up and the paper carrier sheet down.
This can be used for signage and branding in both indoor and outdoor environments.
7.1.2
Heat transfer vinyl
Heat transfer vinyl (commonly called HTV) is not sticky and instead is fused with heat to
fabrics, such as shirts, tote bags, coats, scarves, blankets, stuffed animals, etc. It is
designed to be applied with a heat press or an iron. HTV is cut with the clear shiny side
facing DOWN and the duller back of the vinyl facing up.
7.1.3
Rigid vinyl
Rigid vinyl can come in a range of thicknesses from 70- 500 microns. Most commonly
made from PVC, this clear vinyl has a range of applications.
7.2
Preparation
7.2.1
Spoil board
When selecting a suitable spoil board, we need to ensure to use something smooth, rigid,
and flat.
We would recommend using a 12mm melamine faced MDF board.
7.2.2
Cutting mat
Although it is not mandatory, using a cutting mat when cutting through vinyl will maintain
the condition of the blade and avoid snagging.
A self-healing mat can for this type of application.
To find out more about cutting mats,
please see Section 8.2 Knowledgebase, page 17.
Содержание CNC Stylus
Страница 1: ......