Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
10
CNC
STYLUS
–
QUICK
START
GUIDE
V1.1
6
Pen plotting
6.1
Materials
CNC Stylus can be used to draw, write, and plot on many different types of material
including the following:
•
Papers
•
Cards
•
Woods
•
Textiles
•
Plastics
•
Metals
6.2
Preparation
6.2.1
Spoil board
When selecting a suitable spoil board, we need to ensure to use something strong, rigid,
and flat.
We would recommend using a 12mm melamine faced MDF board.
6.2.2
Work-holding
There are several different ways to hold material down to your spoil board. You should
ensure your material is as flat as possible.
We would recommend using a low tack tape along all edges.
To find out more about work-
holding, please see Section 8.2 Knowledgebase, page 17.
6.3
Mounting a drawing device
To fit your tool to the CNC Stylus, you will need to ensure you select the correct collet size.
Содержание CNC Stylus
Страница 1: ......