20.
21.
ASSEMBLY
Make sure your tools are in good condition.
A worn allen key can round the hex on a bolt
not allowing for proper torque.
Torque settings are listed throughout the
instructions. It is import to properly prep all
bolt threads. The instructions denote whether
to use a Loctite compound or grease.
YETI TIPS
TOOLS NEEDED
Warning: Service on Yeti bicycles requires special knowledge
and tools. Yeti Cycles recommends that all service and
repairs be performed by an authorized Yeti Dealer
• Dead blow hammer
• Two - 5mm allen keys
• 10mm allen key
• Guide pin tool
• Grease
• Blue Loctite (248)
• Pink Loctite (222)
Find and place the upper link spacers while
holding the link.
While holding the upper link spacers slide the
link in place. Have a Fox guide pin easy to reach
before you do this. Slide the guide pin through
the link, spacers and frame to hold everything in
place.
Using the Fox guide pin, insert the female upper
link pivot pin. Remove the guide pin and place in
an easy to reach place.
Prep male bolt with blue (248) Loctite.
01.
02.
03.
04.
