background image

16.

17.

SHOCK SETUP

04. COMPRESSION DAMPING

The compression damping has three levels of 
adjustment and is controlled by the blue lever 
on the shock. The “climb” mode engages the 
firmest low-speed compression setting for 
maximum pedaling efficiency. The “trail” mode 
engages a moderate low-speed compression 
setting for an optimal blend of pedaling efficiency 
and bike control, on various riding terrain. 
Finally, the “descend” mode sets the low-speed 
compression setting to fully open, for maximum 
bike control and shock absorbency on steep, 
aggressive descents.

*All clicks are counted clockwise, rotating from the all the 
way out or counter - clockwise dial position.

ADJUSTMENT

SETTING

AIR SPRING SETTING (PSI)

RIDER WEIGHT LESS 10 PSI

MEASURED SAG (MM)

11MM

REBOUND

*5 CLICKS

COMPRESSION DAMPING

BASED ON TERRAIN

TRAIL ADJUST

POSITION 2

QUICK START GUIDE - CTD ADJUST

05. TRAIL ADJUST

The trail adjust dial controls the “trail” mode low 
speed compression adjustment. It has three 
levels of adjustment and is controlled by the 
black dial on the shock body. Turning the dial 
clockwise increases low speed compression 
damping, making the shock feel stiffer under low 
speed compressions. Turning the dial counter-
clockwise will decrease low speed compression 
damping, making the shock feel softer under low 
speed compressions. Please note this adjustment 
only affects the shock performance while riding in 
“trail” mode.

Содержание ASRC


















Отзывы: