OPERATION
PSI
UNIT
STEPS
MODE
2T
CUT-65DS
POST
FLOW
• Output Current
Configuration
Interface:
During the setting of the current value, the numerical screen will provide a real-time dis-
play of the adjusted amperage
• Operational
Procedure:
Preset the cutting current based on the workpiece's thickness
by utilizing the central knob for adjust-
ment. Rotate it counterclockwise
to decrease the current or clockwise to increase it. The red light bar above will correspondingly
re
flect the current's magnitude in synchrony
STEPS
MODE
MPA
UNIT
_tzt¯'
CUT-65DS
s
POST
FLOW
• Post-flow
Time Adjustment
Interface:
During the configuration
of post-flow time, the digital display will dynamically
reflect the
changes to the duration.
• Post-flow
Duration
Configuration:
Depress the POST FLOW button to transition into post-flow timing mode (indicated by the illu-
mination of the "S" light). Adjust the duration using the central dial; turn left to decrease and right to increase the time value. The
light bar above will visually sync to reflect the magnitude of the duration (default post-flow time: 5 seconds, with an adjustable span
from 5 to 2() seconds). After a lapse of 5 seconds upon configuration,
the system will revert to the current setting mode automati-
cally, displaying the preset current as the "S" indicator light extinguishes
and the "A" light activates. Alternatively,
one may press
the button directly to switch back to the current setting mode
• (NOTE: The cutter will remain in Output Current Configuration
Interface when POST FLOW is not pressed to toggle the setting
The character A is displayed at the bottom Of the screen (representing that it is now in the Output Current Configuration
Interface)
and the character S is displayed at the top of the screen (representing that it is now in the post-flow Time Adjustment Interface))
-18