INSTALLATION
OUTPUT
CONNECTIONS
CONNECTING
TORCH
AND
WORK
LEAD
9
CONNECTING
WORK
CLAMP
The work clamp must be securely connected to the workpiece.
If the work piece is painted or extremely dirty it may be necessary to
expose the bare metal in order to make a good electrical connection
INPUT
CONNECTION
The CUT-65DS
is rated for 1 IOVAC and 220VAC input voltage
Before installing
the machine,
check that input supply voltage,
phase, and frequency are the same as the machine's voltage, phase, and frequency as specified on the machine's rating plate.
The CUT-65DS automatically
senses and adjusts to work with the input voltage listed on the rating plate when connected to the cor
responding plug
• The CUT-65DS should be connected only by a qualified electrician. Installation should be made in accordance with local codes.
-12