OPERATION
STEPS
MODE
POST
UNIT
FLOW
CUT-65DS
• Pressure
Value Configuration
Interface:
During the process of setting the pressure values, the numerical screen will provide a
real-time display of the adjusted barometric
readings
• Steps Are As Follows:
Start the gas flow; Lift the air pressure adjustment button upward; Adjust the gas pressure to the desired value
by rotating the knob (rotate
to increase gas pressure; rotate
to reduce gas pressure);
Press down the
pressure control knob to get the knoblocked.
STEPS
MODE
2T
MPA
POST
UNIT
FLOW
CUT-65DS
• Pneumatic
Pressure
Unit Conversion:
Accommodates
both PSI and MPl units, with PSI as the default measurement
The unit
may be altered by engaging the UNIT button, which prompts the display to indicate the selected denomination
during the transi-
tion.