OPERATION
PSI
UNIT
STEPS
MODE
POST
FLOW
CUT-65DS
• After power on, the digital screen lights up and the right display panel will display the preset output current. The middle display panel
automatically
recognizes and displays the input voltage of 220V/1 IOV (if the input voltage is within an acceptable range, the green
light will light up; otherwise, the yellow light will light up, indicating the need to check for undervoltage).
STEPS
MODE
POST
UNIT
FLOW
CUT-65DS
• Air Pressure
Display:
The display will show the air pressure immediately after connection to the pneumatic system and startup; in
case Of startup without air supply, the screen will show "E-5".
• 2T/4T: Upon initiation, the primary screen will exhibit the 2T cutting mode
-16